Urine sample cup high quantity used in hosptal and some lab. Due to need to see the volume urine hold inside the cup, it’s plastic raw material need to use high transparent PP. XS Plastic Mould Co., Ltd made many sets such small medical products mould every year.
Above urine sample cup mould test samples finished with measuring mark. The mark is from 10ml to 40ml, so we can call this 40ml urine sample cup.
8 cavity urine sample cup mould made for customer to open the market. As most of time, we need to have the products first to begin the business. So a small amount cavity number urine sample cup mould is our first choice. After sales quantity become large, then order huge quantity cavity nunmber mould.
Due to the PP material we used for the mould test is not best transparent, and mould test injection machine barrel is mixed with many different plastic material, so can not get very clear sample. That’s why the urine sample cup mould test sample in the above video looks foggily.
40 cavity urine sample lab container mould
Hot runner 40 cavity ruine sample lab container mould. Due to high quantity cavity no., mould steel and mould tooling have to be made surely with high standard. So mould core and cavity are used S136 steel and with vacuum quenching hardening treatment. Additionally hot runner system have to be high quality hot runner system on account of so many zones hot runner, in case one or two hot runner zone get problem, and mould can not use, will cause large lost.
Core inserts and cavity inserts are self-lock design. With this conception design, we can improve the eccentric problem easily, in case this problem happened. Another hand, core and cavity inserts design easy for the mould repair in future. As a professional mould factory, we have to consider all the facts, such as mould life, mould easy to use and easy to maintain, etc.
Normally for this product injection moulding cycle time is only about 15s, or even less. Of course, injection machine affect the cycle time a lot. Same mould use in normal injection machine cycle time is longer, but on high speed injection machine cycle time will be shorter to about 8s only.